Cutting floor to install loop coil is the most time-consuming and labour-intensive job when installing a barrier gate. What if you can save money by cutting down the installation time and labour required to install a barrier gate?

Double detection, double safety
DualRay technology recognize the 3D space of detection area more accurately to minimize false trigger that can cause barrier arm to hit on people and car.

Reduce installation time to just 30 minutes
BRD03 DualRay uses frequency to detect vehicles and therefore does not require any loop coil. All you need to do is to mount it onto the barrier gate housing. A traffic detector is a faster and easier alternative to a loop detector.

Less hassle to setup
Unlike other brands that require connecting to software via a data port, the BRD03 DualRay and LED Display setting can be programmed by the built-in dual push button.

With the LED display it’s much more easy to configure according to end user desire setting.

Safer
Other than a vehicle, a traffic detector can also auto reverse the arm when detecting a human. This is the added safety feature that is not available at loop detectors where it can only detect metal.

Strong environment adaptability
The traffic detector does not require any underground loop coil therefore its performance is not affected by rain, heat, dust, cold and harsh weather condition.

Work on any vehicle
One of the biggest challenges of loop coil is to detect big truck as there are typically higher above ground. BRD03 DualRay is enhanced with dual-lens 3D detection where it can detect vehicles of any height more accurately. The wider coverage area of BRD03 DualRay also allows it to detect small vehicles such as a motorcycle or even a bicycle.

Work on any surface
Loop coil might not work well on interlocking bricks, soiled road or metallic plates typically found in the construction site. A traffic detector will be the best alternative to a loop detector in these road conditions.

Start enjoying the lower cost and faster installation of your barrier gate today. Click here to contact us now for more info.

If you are not ready to buy now, click here to learn about the 4 common problems of long range RFID barrier gate system to help you make a wise choice.

Lining foam – car will not easy get scratch.

Lining foam – car will not easy get scratch.

In any card access system, the reader will trigger a barrier gate to open upon flashing a valid card. But how to allow the barrier gate to automatically close after the car has passed through?

With the enhanced EWI loop detector (BRD05). If the loop coil having any changes of the inductance due to loop coil cable condition, road surface changes or any other unforeseen interference, EWI loop detector is safe and secure to function.

The loop detector is reliable and cannot be tempered easily as the main control is hidden inside the barrier ggate.

The loop detector is reliable and cannot be tampered with easily, as the main control is typically hidden inside the barrier gate.

Avoid arm hitting a car
A loop detector can also help to prevent the gates from closing too soon. When the vehicle is passing through, it will break the circuit and tell the gate to remain open, preventing it from closing on the car. When the barrier arm is descending, BRD05 will trigger the arm to auto-reverse if it detects another vehicle entering to avoid hitting it.

No human shall pass through barrier gate lane
BRD05 is a metal detector and cannot detect humans. BRD05 will not be able to trigger the barrier arm to descend if a human walk past through. To avoid this problem, another BRD01 can be installed to ensure there is a vehicle before activating the reader to accept card reading.

Cannot go in from the opposite direction
In some cases where there is no card access system, BRD05 can be used to automatically trigger the barrier gate to open upon detecting the presence of any vehicle. By installing the loop coil in 1 direction, you can effectively block any vehicle trying to enter from the other side.

Start enjoying the reliability at an affordable price backed up with good spare parts and repairing service of our loop detector. Click here to contact us now for more info.

If you are not ready to buy now, click here to learn about the 4 common problems of long range RFID barrier gate system to help you make a wise choice.